[Dhsvm-users] Final Mass Balance output

[Teklu Kidane Tesfa]

Dear dhsvm users,
   
  The problem I had with the "Invalid date specified in: ..\metfiles\leavenworth_1990_99"
  was mismatch in the number of input variables listed in the met file and the number of input variables expected by the function ScanFloats() in Files.c. 
   
  I have another question though:
  I run the model for the tutorial data and have got the following results that I couldn't figure out the reasons:
   
  Some estimates for current vegetation specification
   
  Vegetation Type: DRY_int1
  2meter wind speed fraction of ref level 0.093
  Overstory LAI July 5.000 Effective LAI July -107374176.000
   
  Vegetation Type: DRY_int3
  2meter wind speed fraction of ref level 0.086
  Overstory LAI July 5.000 Effective LAI July -107374176.000
   
  Vegetation Type: Forest_si2
  2meter wind speed fraction of ref level 0.070
  Overstory LAI July 5.000 Effective LAI July -107374176.000
   
  Vegetation Type: Forest_si3
  2meter wind speed fraction of ref level 0.071
  Overstory LAI July 6.000 Effective LAI July -107374176.000
   
  And, the final mass balance output was as follows:
     

  Final Mass Balance
   
  Inflow, 5548.83:
   Precip (mm): 5548.834801
   
  Outflow -1.#J:
   ET (mm): -1.#INF00
   SnowVaporFlux (mm): 34.232665
   CulvertToChannel (mm): 0.000000
   ChannelInt (mm): 3865.114927
   
  Storage:
   Initial Storage (mm): 286.250651
   End of Run Storage (mm): 116.815880
          Final SWQ (mm): 0.065313
          Final Soil Moisture (mm): 76.182872
          Final Surface (mm): 40.567695
          Final Road Surface (mm): 0.000000
   
  Other:
   RoadInt (mm): 0.000000
   CulvertReturnFlow (mm): 0.000000
   Mass Error (mm): -1.#INF00
   Mass added to glacier (mm) 0.000000
   
  STARTING CLEANUP
   
  I would highly appreciate if someone can give me some hints why it is giving me:
   
  Effective LAI July -107374176.000 for the vegetations,
   
   and 
   
  Outflow -1.#J:
   ET (mm): -1.#INF00
   Mass Error (mm): -1.#INF00, in the final mass balance outputs?
   
  Thank you 
   
  Teklu
   
   
  

dhsvm-users-request at mailman1.u.washington.edu wrote:
  Send Dhsvm-users mailing list submissions to
dhsvm-users at u.washington.edu

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman1.u.washington.edu/mailman/listinfo/dhsvm-users
or, via email, send a message with subject or body 'help' to
dhsvm-users-request at mailman1.u.washington.edu

You can reach the person managing the list at
dhsvm-users-owner at mailman1.u.washington.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Dhsvm-users digest..."


Today's Topics:

1. Invalid date error in dhsvm (Teklu Kidane Tesfa)
2. RE: Invalid date error in dhsvm (Carrie Donnell)


----------------------------------------------------------------------

Message: 1
Date: Tue, 15 Jan 2008 10:25:34 -0800 (PST)
From: Teklu Kidane Tesfa 
Subject: [Dhsvm-users] Invalid date error in dhsvm
To: dhsvm-users at u.washington.edu
Message-ID: <150022.8067.qm at web35615.mail.mud.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

Dear dhsvm users,

I am trying to run the dhsvm tutorial in windows and am getting the following error:
Invalid date specified in: ..\metfiles\leavenworth_1990_99

I tried every possibile checking in all the weather data, configuration file and the code that reads the met data and could not locate the error. It seems a simple one but could not solve it. The met data seems fine. The configuration file needs the start and end dates to be in the met data. Is there someone who has the same exprience with dhsvm? 

I hope someone will respond and send me his/her version of configuration file to compare with mine.

Thank you in advance

Teklu


dhsvm-users-request at mailman1.u.washington.edu wrote:
Send Dhsvm-users mailing list submissions to
dhsvm-users at u.washington.edu

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman1.u.washington.edu/mailman/listinfo/dhsvm-users
or, via email, send a message with subject or body 'help' to
dhsvm-users-request at mailman1.u.washington.edu

You can reach the person managing the list at
dhsvm-users-owner at mailman1.u.washington.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Dhsvm-users digest..."


Today's Topics:

1. Problem with channel routing in version 3.0 (Ed Salminen)


----------------------------------------------------------------------

Message: 1
Date: Mon, 10 Dec 2007 10:42:00 -0800
From: Ed Salminen 
Subject: [Dhsvm-users] Problem with channel routing in version 3.0 
To: dhsvm-users at u.washington.edu
Message-ID: <475D8878.10306 at watershednet.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I am trying to run DHSVM with the sediment module. I am not interested 
in the mass wasting output, so I have mass wasting set to FALSE in the 
sediment options section of the sediment configuration file. The model 
appears to run OK when I have the channel routing set to FALSE, however, 
when I set the channel routing option to TRUE the model locks up after I 
get the following output in my terminal window:

STARTING SEDIMENT INITIALIZATION PROCEDURES

Sediment Surface Erosion component will be run
Sediment Road Erosion component will be run
Sediment Channel Routing component will be run
Initializing sediment tables
Initializing mass wasting resolution maps
fine mask = /home/eddie/DHSVM/input/mask10.bin
Basin has 6838500 active pixels in the mass wasting resolution map
Initializing channel sediment

There are several output files created in the output directory, but the 
only two that have any values in them when the program stops running are 
the "saturation_extent.txt" and "Stream.Flow" files, both of which have 
data for the first three time steps.

Thanks,

Ed Salminen


------------------------------

_______________________________________________
Dhsvm-users mailing list
Dhsvm-users at mailman1.u.washington.edu
http://mailman1.u.washington.edu/mailman/listinfo/dhsvm-users


End of Dhsvm-users Digest, Vol 37, Issue 4
******************************************



" Give thanks to the Lord for He is good. His love endures forever!" Psalm 136:1


---------------------------------
Never miss a thing. Make Yahoo your homepage.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman1.u.washington.edu/pipermail/dhsvm-users/attachments/20080115/d5b5fa8e/attachment-0001.htm

------------------------------

Message: 2
Date: Tue, 15 Jan 2008 12:26:37 -0700
From: Carrie Donnell 
Subject: RE: [Dhsvm-users] Invalid date error in dhsvm
To: User Support list for DHSVM Model 
Message-ID: 
Content-Type: text/plain; charset="windows-1252"


I have encountered this error before and it turned out that I was missing data for one hour somewhere in the met input file.


Date: Tue, 15 Jan 2008 10:25:34 -0800From: tktesfa2003 at yahoo.comTo: dhsvm-users at u.washington.eduSubject: [Dhsvm-users] Invalid date error in dhsvm
Dear dhsvm users,

I am trying to run the dhsvm tutorial in windows and am getting the following error:
Invalid date specified in: ..\metfiles\leavenworth_1990_99

I tried every possibile checking in all the weather data, configuration file and the code that reads the met data and could not locate the error. It seems a simple one but could not solve it. The met data seems fine. The configuration file needs the start and end dates to be in the met data. Is there someone who has the same exprience with dhsvm? 

I hope someone will respond and send me his/her version of configuration file to compare with mine.

Thank you in advance

Teklu
dhsvm-users-request at mailman1.u.washington.edu wrote:
Send Dhsvm-users mailing list submissions todhsvm-users at u.washington.eduTo subscribe or unsubscribe via the World Wide Web, visithttp://mailman1.u.washington.edu/mailman/listinfo/dhsvm-usersor, via email, send a message with subject or body 'help' todhsvm-users-request at mailman1.u.washington.eduYou can reach the person managing the list atdhsvm-users-owner at mailman1.u.washington.eduWhen replying, please edit your Subject line so it is more specificthan "Re: Contents of Dhsvm-users digest..."Today's Topics:1. Problem with channel routing in version 3.0 (Ed Salminen)----------------------------------------------------------------------Message: 1Date: Mon, 10 Dec 2007 10:42:00 -0800From: Ed Salminen Subject: [Dhsvm-users] Problem with channel routing in version 3.0 To: dhsvm-users at u.washington.eduMessage-ID: <475D8878.10306 at watershednet.com>Content-Type: text/plain; charset=ISO-8859-1; format=flowedI am trying to run DHSVM with the sediment module. I am not interested in the
 mass!
wasting output, so I have mass wasting set to FALSE in the sediment options section of the sediment configuration file. The model appears to run OK when I have the channel routing set to FALSE, however, when I set the channel routing option to TRUE the model locks up after I get the following output in my terminal window:STARTING SEDIMENT INITIALIZATION PROCEDURESSediment Surface Erosion component will be runSediment Road Erosion component will be runSediment Channel Routing component will be runInitializing sediment tablesInitializing mass wasting resolution mapsfine mask = /home/eddie/DHSVM/input/mask10.binBasin has 6838500 active pixels in the mass wasting resolution mapInitializing channel sedimentThere are several output files created in the output directory, but the only two that have any values in them when the program stops running are the "saturation_extent.txt" and "Stream.Flow" files, both of which have data for the first three time steps.Thanks,Ed Salminen-----!
-------------------------_____________________________________!
________
__Dhsvm-users mailing listDhsvm-users at mailman1.u.washington.eduhttp://mailman1.u.washington.edu/mailman/listinfo/dhsvm-usersEnd of Dhsvm-users Digest, Vol 37, Issue 4******************************************
" Give thanks to the Lord for He is good. His love endures forever!" Psalm 136:1


Never miss a thing. Make Yahoo your homepage. 
_________________________________________________________________
Make distant family not so distant with Windows Vista® + Windows Live™.
http://www.microsoft.com/windows/digitallife/keepintouch.mspx?ocid=TXT_TAGLM_CPC_VideoChat_distantfamily_012008
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman1.u.washington.edu/pipermail/dhsvm-users/attachments/20080115/fcaa2b3b/attachment-0001.htm

------------------------------

_______________________________________________
Dhsvm-users mailing list
Dhsvm-users at mailman1.u.washington.edu
http://mailman1.u.washington.edu/mailman/listinfo/dhsvm-users


End of Dhsvm-users Digest, Vol 38, Issue 1
******************************************



" Give thanks to the Lord for He is good. His love endures forever!" Psalm 136:1

       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman1.u.washington.edu/pipermail/dhsvm-users/attachments/20080115/b937d262/attachment-0001.htm